Call nowFree estimate
Renew what is there

Hardwood Refinishing

Sanding and a new finish for hardwood that still has the thickness to take it, after the floor is checked for moisture and old repairs.

Completed projects include a 1-year warranty that starts at project completion.

The finish

Sanding, color, and a coat that fits the house

Refinishing is for hardwood that is still thick enough to sand. The old finish comes off, repairs are made where they can be made, and a new finish goes down. It is not a coating painted over a worn surface.

Screen and recoatIf the finish is dull but intact, a screen and a new coat can restore it without cutting to bare wood. This only works when the finish has not worn through and the boards are still flat.
Full sandThe finish comes off to bare wood. Scratches in the finish go with it. Deep dents and cups in the wood may remain, or they may be too deep for the thickness you have left.
ColorStain is an option on bare wood. Oak takes stain evenly enough to plan. Maple and some thin veneers do not. We test a board in the room's light.
SheenOil-modified polyurethane, waterborne polyurethane, and harder coatings differ in amber color, odor, and dry time. Satin is the ordinary good answer in a house with kids and dogs. Gloss shows every claw.
Good candidates

Floors worth saving

The decision is thickness, moisture, and whether a new finish will still look like a patch in the middle of an old one.

Worn finish, sound boardsThe typical case. The finish is gone in the hallway lane and the boards are still flat and thick.
A color changeYou can go darker, and sometimes lighter, if the wood will take it. Some species will never reach a whitewashed sample, and the test board will show that.
Before the furniture arrivesA house you just bought, with someone else's finish and someone else's wax, is easier to refinish while the rooms are empty.
Poor candidatesEngineered floors with a thin wear layer, boards cupped from an active leak, and floors already sanded down to the tongue. Those get a different recommendation.
The work

Dust, coats, and a real cure time

Sanding makes dust. Coat day needs the rooms empty of pets, dinner, and foot traffic.

AssessmentThickness at a register or a doorway, previous sandings, squeaks, and any cupping. A moisture problem is fixed before anyone sands. Sanding a wet floor makes a smooth wet floor.
Repairs while it is openLoose boards get fastened. A few bad boards can be replaced if a match exists. Fill is used where fill is the right tool, and it is not a structural repair.
Sanding and coatingWe isolate what we can. Each coat needs its dust-free window. The product we use sets how long the rooms stay closed.
Cure and walkthroughA floor may be walkable in socks before it is ready for rugs and dogs. We leave you with that wait, and we look at the sheen with you in daylight.
After the last coat

The finish is not done curing on day one

Most early damage on a refinished floor is rugs, water, and furniture that came back too soon.

The first weeksNo rugs that can trap moisture, no exercise equipment, and no wet mopping. Furniture comes back when the finish can take the weight.
After thatThe same habits as a new hardwood floor: grit out, felt on chairs, and a cleaner that matches the coating.
HumidityRefinishing does not stop wood from moving. If the floor cupped because of a humid crawl space, it will cup again unless that moisture is addressed.
Later recoatsA maintained finish can be recoated years on. Waiting until the lanes are bare wood means a full sand instead.
Refinishing questions

Thickness, dust, and sheen

If the floor cannot be sanded, we would rather say so before the rooms are emptied.

Can every hardwood floor be refinished?+

No. The wear layer has to have enough wood left above the tongue, and the floor has to be dry and fastened. We would rather replace a thin engineered floor than sand through the veneer.

How many times can a floor be sanded?+

Solid 3/4-inch oak can take several full sands over decades. Each sand removes wood. A floor sanded flat in the 1990s and again later may be near the end. The honest answer is the thickness we measure.

Do we have to leave the house?+

You have to leave the rooms being finished, and dust does travel. Many people stay elsewhere in the house and keep the work area shut. Sleeping in a room that was coated that afternoon is a bad idea. Odor and cure time depend on the finish.

What sheen makes sense with dogs?+

Satin, usually. Gloss shows every claw. A very matte waterborne can look soft and still show traffic dirt. We put sample boards on your floor rather than choose from a name on a can.

If the boards are still thick, start there.

Photos of the worn lanes and a doorway help us tell a recoat from a full sand.

Completed projects include a 1-year warranty that starts at project completion.

Request a free estimate